Ir al contenido principal

Tire pressure monitor fault ford focus

Ford Focus C-Max - ABS Flasher Lights 


Ford Focus

Model: C-Max 1.6 16V TDCI

Date of manufacture: from 2006

All models with ABS/ESP

The ABS indicator light comes on

Error code: C1288

Pressure sensor

Failure of an electrical circuit

If the above error code is detected and the ABS indicator light illuminates, it may be due to a failure in the brake pressure sensor.

This sensor detects the brake pressure in the hydraulic system and transmits this data to the control unit. An error in receiving the signal could be interpreted as a fault in the control unit. As it is not possible to measure on the sensor itself, in this case the power supply and the peripheral elements of the ABS system must be checked first. If the measured values correspond to the nominal values, the pressure sensor must be replaced.

Repair instructions

The pressure sensor is mounted inside the ABS hydraulic unit and cannot be replaced separately.

In case of failure, the entire unit must be replaced.

 The instructions contained in this website should only be carried out by properly qualified and trained personnel.

The contents of this document, even in part, may not be reprinted, distributed, reproduced, exploited or broadcast in any form without our express written permission and with reference to the sources. Schematic diagrams, images and descriptions serve only to clarify and illustrate the text of the document and may not be used as a basis for assembly or installation. All rights reserved.


Entradas Relacionadas

Tire pressure monitor fault ford escape

Tire pressure monitor fault ford focus

Tire pressure monitor fault

Tire pressure monitor fault ford fusion

Tire pressure monitor fault ford explorer

tire pressure monitor fault ford fiesta

Tire pressure monitor fault ford mustang

Tire pressure monitor fault f150

Entradas más populares de este blog

Tire pressure monitor fault ford fusion

tire pressure monitor fault fusion What is the TPMS Tyre Pressure Monitoring System What is the TPMS Tyre Pressure Monitoring System? The TPMS Tire Pressure Monitoring System is a basic safety system device used to monitor tire pressure levels. From November 1st 2014 new vehicles sold in the European market will be required to be fitted with, amongst other things, stability control and TPMS. This acronym stands for Tyre Pressure Monitoring System and is a device which, together with airbags, seat belts, ABS, etc., forms part of the basic safety systems. As the name suggests, this system is used to warn the driver if one of the wheels is not under pressure. On simpler models a warning is simply displayed on the dashboard with a tyre symbol or the letters TPMS in orange, but does not indicate which of the four pressure drops has occurred. The more comprehensive ones indicate exactly which tyre needs our attention and even provide information on the pressure and temperature of each wheel ...
Leer más

Tire pressure monitor fault ford explorer

Tyre Pressure Monitoring System (TPMS) As an important safety feature, your vehicle's Tire Pressure Monitoring System (TPMS) emits a warning light when one of your tires is significantly underinflated. This video explains how the system works. When the TPMS warning light comes on you must manually check the pressure with a tire pressure gauge and inflate to the correct pressure if required. TIRE PRESSURE MONITORING SYSTEM WARNING LAMP The tyre pressure monitoring system does not replace manual tyre pressure monitoring. For more accurate measurements, you should check your tyre pressure with a tyre pressure gauge at least once a month. Failure to maintain the correct tyre pressure increases the risk of tyre damage, loss of control, vehicle rollover and personal injury. See also "Inflating the tyres" in this chapter. Reading the TPMS Gauge How TPMS works The Tyre Pressure Monitoring System (TPMS) has a low tyre pressure warning light which illuminates when one or more tyres...
Leer más

Tire pressure monitor fault ford mustang

FORD MUSTANG TPMS REPROGRAMMING INSTRUCTIONS Need help recalibrating your Mustang TPMS sensors? HOW TO REPROGRAM MUSTANG TPMS Reprogramming the tire pressure monitoring system or TPMS on your S197 Mustang is not as complicated as you might think! Follow this video as we guide you through this simple process. This is essential when purchasing new tire and wheel kits for your current 2007 Mustang. NECESSARY TOOLS: A Mustang S197Key to the previous Mustang TPMS sensor INSTALLATION INSTRUCTIONS Insert the key in the ignition and leave it in the off position. Press the brake pedal and release it. Turn the key to the on position, then to the off position, then to the on position, then to the off position, then to the on position, then press and release the brake pedal. Turn the key off, then to the on position, then to the off position, then to the on position, then to the on position, then to the off position, then to the on position. At this point you will hear the ...
Leer más